Description
TANNOY Canterbury GR Prestige Gold Reference Used Prices US$ 11400
Comes with instruction manual, jumper, spike (installed), Spike receiver (unused), key, wax, original box. It will be a product that has never been passed on to end users. Sound output has been confirmed. It is ringing with a good sound. The exterior is in a beautiful state with no usability, scratches, stains, etc.
Manufacture Specs :
| PERFORMANCE | |
| Recommended amplifier power | 20 – 300 Watts |
| Continuous power handling | 150 Watts RMS |
| Peak power handling | 600 watt |
| Sensitivity | 96 dB (2.83 volt @ 1 m) |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 5 Ohms |
| Frequency Response | 28 Hz – 27 kHz (-6 dB) |
| Dispersion | 90 degrees conical |
| DRIVE UNITS | |
| Dual Concentric™ high frequency | 52 mm (2”) aluminium/magnesium alloy dome with round wire voice coil. |
| Dual Concentric™ low frequency | 380 mm (15”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil.l |
| CROSSOVER | |
| Frequency | 1.1kHz |
| Type | Bi-wired, hard wired passive, low loss, Time compensated. 2nd order low pass. 2nd order high pass Deep cryogenically treated. |
| Adjustment | +/-3 dB over 1.1 kHz to 27 kHz shelving 2 dB to -6 dB per octave over 5 kHz to 27 kHz slope |
| CONSTRUCTION | |
| Enclosure type | Dual variable distributed ported |
| Volume | 235 L (8.3 cu.ft) |
| Dimensions | 1100 x 680 x 480mm (43.50 x 26.75 x 19.00”) |
| Finish | High density birch ply, walnut veneered, with solid walnut trim, 25 mm (1”) thick front baffle. Internally cross braced and heavily damped. |
Reviews
There are no reviews yet.