Amplifiers

Mark Levinson No.431L Power Amplifier

$3,300

Used Prices US$ 3300
About the product
The product is the main body, power cable, and instruction manual.
The operation has been confirmed.
When operating the standby switch (both ON / OFF)
There is switch noise, but
It seems to be within the specifications.

The exterior has some usability, but There are no noticeable scratches.
Description: Solid-state dual-mono power amplifier. Speaker connections: four Madrigal-designed speaker binding posts. Input connections: two 3-pin XLRs, balanced; two RCAs, unbalanced. Other connectors; two 1/8″ mini-jacks for remote turn-on; one RS-232 port on RJ-11; two Mark Levinson communication ports on RJ-45. Output power: 200Wpc into 8 ohms (23dBW), 400Wpc into 4 ohms (23dBW), 20Hz–20kHz, <0.5% THD (FTC); not rated into 2 ohms or for bridged operation. Frequency response: 20Hz–20kHz, ±0.5dB. Input sensitivity: 130mV for 2.83V output, 1.82V input for full output. Output impedance: <0.02 ohm, 20Hz–20kHz. Signal/noise ratio (main outputs): >65dB (ref. 2.83V). Damping factor: >400, 20Hz–20kHz into 8 ohms. Power consumption: 175W (On), 100W (Standby), 15W (Sleep). Current draw at rated output at 120V: 8.5A (350W into 8 ohms), 14.6A (700W into 4 ohms).
Dimensions: 17.75″ (451mm) W by 7.65″ (194mm) H by 20″ (513mm) D. Weight: 95 lbs (43kg) net, 105 lbs (47.7kg) shipping.

Reviews

There are no reviews yet.

Be the first to review “Mark Levinson No.431L Power Amplifier”

Your email address will not be published. Required fields are marked *